Monday 17 May 2021

WW2 Home Made Scatter and Battlefield Terrain


This is partly inspired by a Youtube video I watched some weeks ago where a guy made some post-apocalyptic terrain pieces using a similar method. I've made a few test models and tweaked it to suit my 28mm WW2 collection. I've seen gaming tables in the past where the gamers have spent hours placing rocks and rubble - and while this provides great detail, it's just not practical for club games that are only played over a shorter time span. These here are made as individual piles, so you can just place or lift them fairly quickly. Something else to add, is the extremely low cost of what I've outlined here. It literally costs pennies for dozens of these terrain pieces, and i hope you'll agree, they look great.

You will need:

A roll of kitchen foil.

A can of black spray paint.

A can of brown spray paint.

Some acrylic light brown paint for drybrushing.

Some ink wash (either GW Agrax Earthshade, Nuln oil, Vallejo Sepia Immersion Dip or similar).

A bag of grit/rocks.

Some small mdf off-cuts, and/or some MDF 'bags of bricks' from Charlie Foxtrot models.

PVA.

First rip off a length of tin foil and crush it into shape on a flat work surface. Make sure you do it really tight and compact.


If you're making rubble piles that lay against walls, then push the tinfoil into a right angle. Here I'm using the angle between the kitchen work surface and wall.

Next 'tuck in' all the thin edges of the tin foil. You don't want them sticking out and folding over etc on your gaming board.


Once you've made a few, spray paint them in matt black. Don't worry too much about little bits of silver still shining through - we'll deal with these later. Tin foil is notoriously light and can blow away while spraying...so pin each one with a bit of blu-tack underneath (small amount).

After the black undercoat has dried, then spray with your choice of brown.

Next, get your wash and an old brush and ink wash each rubble pile. Make sure the paint seeps into all the gaps, as this will hide any more silver not caught by the undercoat or basecoat.

Once this is dry, do a drybrush of your acrylic light brown all over the piles.

Then, get your pva glue and start blobbing it all over the piles. Use as much as you want, but make sure it's enough to hold the scatter you're going to apply next.

Take your mdf off-cuts and start pushing them into the pva glue. I don't bother painting these off-cuts, as they are meant to look like scrap wood anyway.


Then take your mdf bag of bricks and scatter a few of these across the piles too. You can add all sorts of extras if you like - sandbags, barbed wire etc. I've also got a bag of Charlie Foxtrot broken wagon wheels, so I've added one or two of those.


Before the pva dries, take some grit and sprinkle it over the rubble piles. This will fall over anywhere the pva is still exposed.

Leave to dry, and you're done!





Friday 14 May 2021

Peveril Castle Derbyshire

 


Last week we paid a visit to Peveril Castle in Derbyshire. My girlfriend bought us membership of English Heritage for my birthday and it was the first time we'd used it. The drive from Nottingham took just over an hour, and the last ten miles or so was just breathtaking as we followed the smaller B roads through the hills to the small village of Castleton where Peveril is situated.

Castleton is worth the journey itself and boasts some lovely small shops, Cafes and restaurants alongside some great walks. The trek through a side street and up to the Castle itself is very steep, so if you're a bit shaky physically it can be a challenge. Though there are a few seated stopping points along the way. Due to lockdown a part of the exhibition was closed but the Castle keep and grounds were all open to wander around.


The first thing that strikes you is the incredible view. We were lucky enough to have a fairly clear day and you could look out across the valley to see Mam Tor on the other side, with some other significant land marks.


Much of the main structures, such as the main hall etc are now in ruins but what is left is nonetheless very impressive. The large Keep and some of the walls may be weather worn but they're testament to almost 1,000 years of medieval architecture. Built just after 1066 by William Peverel it's an easily identifiable Norman construction. Later it was received by Henry II in 1155 and strengthened (with the building of the Keep) and served mainly as an administrative center for the Peaks. In 1372 it was given to John of Gaunt, Duke of Lancaster.

In the 16th Century it fell into ruin but it was still used by the local courts. During the Victorian period it attracted renewed interest due to a boost in tourism and amateur and semi-professional archaeology.


It doesn't take long to do a walk around Castleton and Peveril Castle, but it's an excellent day out if you live within driving distance. If you're a bit more adventurous you could combine it with a tour of other sights in the area, such as the various caverns nearby, and extend it into a thoroughly enjoyable holiday.